Home Improvement

The WR membrane should be peeled back carefully to minimize tears, holes or other damage to the WR membrane. It is necessary to leave some existing WR membrane for proper lap and integration with flashings. A minimum two-inch over lap on horizontal joints and a six-inch overlap on vertical joints of the WR membrane will be needed when final lathing takes place.

STUCCO REMEDIATION (Flashing and WR membrane)

The installation/remediation of the framing, sheathing, window, and all flashings should be complete and inspected by qualified persons prior to installing the WR membrane. There are several options, methods, and products for flashing windows. Many of these options are in the NWCB Stucco Resource Guide. The NWCB recommends the WR membrane and all flashings should be installed in “”shingle”” fashion if at all possible. This means all upper layers overlap lower layers to direct water down and ultimately out at a “”weep”” point. This would include all “”peel and stick”” type flashing membranes, metal and PVC flashings. An asphalt emulsion can be used over the exposed surface of the WR membrane to seal minor holes and tears. Compatibility of products and materials should always checked prior to installation. Some materials can have an adverse reaction to asphalt saturated products or polyolefin spun bonded products. “

Home Improvement

How to know if the molds are present?
Mold assessment is done by visual examination. Careful detection of the premises along with the presence of odor caused by mold will help ascertain if mold are present or not.

Why should molds be removed?
Molds are formed as a result of moisture deposition and they reproduce by spores. Exposure to molds may cause the following health effects:
– Respiratory Problems
– Headache, eye irritation
– Cough and Throat Irritation
– Sneezing, nasal and sinus congestion
Hence, it is necessary to perform mold removal or mold remediation.

What are the methods for mold removal?
Methods followed by professionals such as removal of moisture and moisture causing agents will help remove and eradicate molds. In case of excess molds, chemicals and proteins are used for mold removal. Experts will best understand about which method of mold removal to follow, with methods ranging from dry brushing, dry ice blasting, vacuum and dry wipe.

Do hidden molds exist?
Molds may appear in places not visible to the human eye. Furniture and equipment are to be moved and checked for thoroughly if there are molds present behind them. This can be done periodically or in events where smell arises.

What are the methods for mold remediation?
Remediation follows a two-step approach. The first step pertains to the stoppage of moisture and moisture causing agents, while the second step includes usage of wall insulation, dehumidifiers, exposure to sunlight etc.

Are there varieties of molds present? If so, are they all equally harmful?
Molds known as black molds are highly dangerous, owing to the presence of elements which can produce mycotoxins. However, the mold removal and mold remediation procedures for all kinds of molds remain the same. It is best suggested to get rid of the molds present, without giving much significance to the kind of mold that exists.

What are black molds?
Stachybotrys chartarum, the mold which is greenish-black in color is known to be as black mold. They release mycotoxins based on the factors such as the humidity level, temperature etc. Mycotoxins are present in and around the areas contaminated by the mold, invariable of the fact that the mold is alive or dead.

Can I perform mold removal and mold remediation myself?
Mold removal or mold remediation can be done by people who are free from all sorts of allergies and prior known infections caused due to the molds. Molds should be handled with utmost care and certain preventive measure are to be taken before one plans to remove molds and it is highly essential that personal protection is worn during the process.

How can I ascertain that the molds were removed successfully?
If the molds do not reappear in a certain span of time, you can consider that the molds have been removed successfully. If not, the problem that causes molds still exists and needs to be dealt with.

Once removed, how can I dispose the molds?
Molds can be disposed in the remediation area and can be treated on par with construction debris, following the same procedures.

Home Improvement

Tatajuba wood is gaining popularity among many commercial designers and architects because of its great durability, visual appeal, and resiliency factors. The number one major reason why Tatajuba is gaining recognition is the great return on investment that it offers both homes and businesses. The more durable the hardwood, the longer-lasting it is. In addition to this longevity, when you combine the fact that dense hardwood decking material can also weather and take heavy traffic and use better than composite materials and you can see how, in the short and long term, Tatajuba more than pays for itself.

Tatajuba is a great wholesale decking option for large commercial and/or municipal projects. Its also a great alternative to composite and pressure-treated decking materials. As those materials degrade very fast due to the weather and normal foot traffic, a boardwalk, walkway, or bridge that uses Tatajuba wood will have years of maintenance free use. And, as you will soon read, this hardwood option is also much more eco-friendly than any synthetic material. When you see a commercial business of city project that uses Tatajuba, you can rest assured that a great amount of money will be saved in maintenance and upkeep costs.

While its no mystery that this South American hardwood provides a great rate of return, Tatajuba does have one particular characteristic that makes it stand out over many other decking options. Simply put, Tatajuba literally transforms in a very short amount of time from a yellowish toned wood to a beautiful golden brown. Its been speculated that like all other woods, exposure to the sun is what changes this woods color. However, research and experimentation has shown that exposure to the air is what makes this metamorphosis happen. Its important to know before planning your commercial or home renovation project that this change will occur regardless of the climate, or the application.

Business owners who contact builders and contractors about this unique hardwood tend to ask if this wood really is durable and resilient. The short answer is yes. It is very resistant to termites, mold, decay, and many other common defects that composite and pressure treated materials are prone to. In addition, another totally unique benefit that this wood provides is that it is beyond eco-friendly.

Not only is Tatajuba sustainably harvested, but it also grows really, really fast. While other species may take up to a full century to mature in the wild, Tatajuba only takes a few decades. When you add sustainable forestry practices into the mix, that maturity time is significantly lessened.

Likewise, before you order a container of Tatajuba, always be sure to ask the supplier if they are importing only eco-friendly Tatajuba that came from sustainable forestry methods of cultivation and harvesting. If the answer is yes, then you can rest easy knowing that when you buy Tatajuba youre ordering from a responsible company that adheres to the strictest environmental policies.

Ultimately, if youre looking for an eco-friendly, resilient, and beautiful wholesale decking option for your commercial or home improvement project, Tatajuba is a great option that should be on the top of your list of considerations.

Home Improvement

All types of pavers, whether they are made from concrete, brick, or stone, can suffer from rust stains especially if you have metal chairs and furniture on your patio. Prevention is the best way to protect your pavers from rust stains. This means you have to properly paint metal furniture before you place them on the patio. However, there are instances that rust stains will still appear on the patio paver as the paint coating of the patio furniture disintegrates. So here are some basic tips on how you can remove rust stains from patio paver.

Using Pure Lemon Extract

If the rust stains on your patio paversare not severe, then you can grab a fresh lemon and use it as a natural patio paver cleaner. Do not use artificial or concentrated lemon juice as cleaning agent because it will not remove the stains on the paver.

First, you have to cut the lemon in half and squeeze its juices on the affected areas. Allow the natural acid of the lemon juice to react with the rust stains. Let it stand for at least 15 to 20 minutes but do not allow the lemon juice to dry. After 15 minutes, grab an old toothbrush and start brushing away the rust stains from the paving stones or bricks. This solution will restore your patio to its old beauty.

Fighting Rust Stains with Vinegar

If the rust stains on the patio paver are too severe and you are seeing large stained areas on the pavers, then you have to use a stronger cleaning agent. Your best bet is to use pure or distilled white vinegar which you can easily buy from a local grocery.

The first thing that you should do is to remove sand, soil and other dirt on the affected paving stones. Pour the vinegar over the stained area and allow it to react and dissolve the rust. Just wait for 20 minutes before you brush off the rust stains. You may have to use a large brush with stronger bristles in order to complete eliminate the rust stains from the stones or bricks.

Chemical Solution

In case lemon extracts and vinegar failed to do the trick, then you are faced with tough rust stains that have already seeped in to the outer coating of the pavers. In such cases, you can use special chemical cleaning agents for patio paver. You can ask the company who installed the pavers if it has the right cleaning agent against rust stains.

However, you can easily use oxalic acid to remove rust stains on your patio. You have to remember that oxalic acid is a toxic agent so you should handle it properly. You have to follow the instructions on the packaging of the oxalic acid in order to protect yourself and the vegetation around your patio.

You can purchase oxalic acid from local home improvement shops, laundry stores, and hardware. Oxalic acid is a crystalline substance which should be dissolved with water. One scoop of oxalic acid in a bucketful of water should be enough to remove tough rust stains. Just pour the solution over the affected areas and let it stand for 10 to 15 minutes. After that, you can now start brushing off the rust stains using a plastic brush.

Home Improvement

While solar power systems are preferable in locations that have an extensive amount of sunlight and while home windmills are popular at areas with constant flow of wind, the greatest benefit of a magnetic power generator is that you it can function in all weather, in all temperature, does not take up any substantial amount of space and is completely clean and totally free. That is the reason why you need to know how to build a magnetic power generator.

Are you looking for ways to power your own home with electricity that you create yourself? Over the years it has become increasingly popular for people to partially power their own house and reduce their reliance on electricity companies. The most common method that is used today to create electricity at your own home is through the installation of solar panels. Solar panels have allowed people to make their own electricity to run appliances and cut what they spend on their electricity bill.

Similar to solar power, wind power has been used by larger corporations and governments to create electricity on a much bigger scale to partially power towns or other establishments. Both of these methods are popular green alternatives to making electricity, but they do have weak areas. Solar power is great but if you don’t receive enough sunlight you are unable to create enough electricity. Wind power is only useful in areas with strong winds and wind turbines require massive amounts of space. Neither of these two are a practical solution for anyone looking to create their own electricity for their house. It is a Power Generator with Magnet.

The Magnetic Power Generator, promises to create absolutely free energy, and doesn’t require any resource like wind or solar energy to function, the generator creates energy by itself and powers your home for free. This magnetic power method was known for centuries, but large companies sabotaged its widespread usage, and the guide for such a free magnetic energy generator with the potential of revolutionizing our home energy supply has never seen the sunlight.

There are many advantages of using a generator with magnet. For example, using very little space up in your home, so you will be able to place it without a big space being available. Power bills will be eliminated either by half or even the complete thing depending on how much you want to use the free energy generator. Doesn’t matter if it’s hot or cold out the generator does not have to be in an environmentally controlled area. Materials that you need to build your generator are inexpensive and easy to find anywhere in the world.

A new focus of interest now falls in the development of free energy generator known as the magnetic power generator. This system is able to produce more energy than it needs to run by itself, which results in free energy. It can be manufactured easily and capable of producing sufficient energy to support the entire house.The magnetic power generator harnesses this magnetic force to create continual motion. The generator, once started, runs on by itself and whilst the magnets maintain their polarity, the system will never stop. It is speculated that in the same way that solar power systems have become more accepted by the general population, so will magnetic energy and within the next ten years, energy companies will be implementing these systems in many houses around the world. Why wait till the energy companies to catch on when you can build a magnetic power generator for yourself, cheap and easy.

When looking at what kind of savings you can expect from any alternative way to create your own electricity, you really need to take all factors into consideration. Some people fell into the solar power trap by not looking at everything involved with switching their own and appliances over to solar power. There are often many hidden costs or other issues that you may not see at first glance. There is also the issue that typical savings and realistic performance varies greatly from what they have on paper. How much money do you need to setup and install the required parts? How long will it be before you can expect some kind of savings?

Home Improvement

Any time you hear the word appliances, electrical devices would be the 1st words that come to a persons thoughts. Needless to say appliances are electronics which run on battery or electrical energy. But there are many other kitchen appliances which run purely on gas.
And however there are actually some others which run on each gas and electricity. These wide variety of as gas associated merchandise and fittingsinclude stove, gas ovens and BBQs or grills, charbroilers and gridirons. Diverse organizations manufacture range of models of these appliances. Though their function would be the exact same but every single model features a special good quality which makes it diverse from the other gas appliances. The gas ovens are classified on the basis of free of charge standing with 60cm and 90cm. Also the burners variety from two to 5 for the gas ovens.
A stove is usually a cooker which makes use of all-natural gas and other flammable gas as fuel. In earlier instances the gas stoves had been ordinarily huge and occupied much more space. Now a days these stoves have been integrated with ovens and are additional slim occupying much less space. Within the category of stove there is a variety. Vent much less stoves are now accessible along with vent absolutely free organic gas stoves. These could be employed as kitchen appliances which are atmosphere friendly. Some stoves are small in size and are portable and may be taken to picnic. You will find a huge selection of manufacturing organizations which manufacture gas stoves for kitchen. Men and women obtain gas stoves as they may be far more reliable and simple to use.
Gas ovens are a later invention. The only difference among a stove and oven is the fact that the stoves were integrated with ovens therefore making them gas ovens.

Home Improvement

A house is prized possession for all. A slight damage can upset anyone. From time to time you are required to renovate interior as well as the exterior of your house. This involves a lot of planning and concentration and a slight mistake can ruin the entire plan. Doing something on your own with matters relating to renovation always requires professional help. But from where can you get these help? Simple, all you need to do is switch on your Satellite TV and watch the home improvement shows featured on various channels. Few of these shows include:

Fix This Yard

Is the backyard of the house is full of garbage items? And lets say the paint id also coming out of the fence? Too much of shrubs growing here and there at your front door path? And to top it all your neighbors are also giving pathetic looks, huh? There is so much to do but you dont know how.

Hey! Just relax. Just give a call to Alan and Amy and they will be more than happy to assist you. But who are Alan and Amy? Well, they are the hosts of Fix This Yard broadcasted on A&E of DISH Network.

Sometimes the dilapidated condition of your house becomes an eye-sore for your inquisitive neighbors and they start giving nasty looks. Not only your neighbors but your friends and relatives also stop coming at your place due to the haunted condition of your house. Amy and Alan will fix all your problems. The show hosts will teach the homeowners simple and convenient techniques to give a perfect look to your yard. They will also tell you how to maintain your fixed yard. From an eye-sore your house will become an envy of your neighbors.

Kitchen Impossible

Majority of the home-makers spend an essential part of their time in their kitchens preparing delicious dishes. Like any other part of your house your kitchen needs equal attention while renovating the same. There are numerous shows on DISH TV that provide with unique ideas on how to renovate your kitchen and give it a new look.

One such show is Kitchen Impossible featured on DIY channel. Some of the home owners feel that changing the look of the kitchen involves a lot of hassle. Ace with carpenter and electrician Marc Bartolomeo, will design a perfect plan for your kitchen renovation. It might seem a havoc task. You might have to rip ripping out the existing construction. But through patience and sheer hard work, this havoc task can quite easily be executed. Watching this show you never say kitchen impossible but youll definitely say kitchen possible.

Home Improvement

Wainscoting or panelling, as it is more commonly known, is a type of finish carpentry. Instead of covering walls with wallpaper or paint, you can choose to wainscot instead. Beautiful wainscoting can serve as a great decorative accent to any room and add additional insulation if you live in a cold area. It is also a great way to cover up unsightly parts of the wall.

Wainscoting refers to panelling only the lower section, about 3 to 5 feet of the wall, right below molding or a dado rail. The great thing about this nifty type of home improvement is that you can do it to any part of the house and you can find a type of wainscoting that suits your lifestyle and budget.

Traditionally, hard wood or soft wood is used for wainscoting. A cut of wood known as the tongue and groove (so named because they can be joined to make a flat surface) is normally used for most wainscoting projects. The groove is a slot cut into one edge and the tongue fits right into these grooves, creating a seamless look. This allows for a close fit that gives the impression of a flat surface. If you’re into DIY home improvement projects, this is definitely one of the best materials around for wainscoting.

One of the lovely things about modern technology is that there are a variety of materials available for any homeowner looking to improve their home. Plastic, vinyl and other materials can be used for wainscoting as well. Bamboo is also a great alternative if you are looking to use environmentally friendly materials in your home.

You can even think out of the box and use upholstery or cloth when wainscoting. Budget friendly, pre-made wainscoting can be found in most hardware stores. It really depends on what type of look you are going for.

For those with higher budgets, you can also think of decorative wood panelling, known as boiserie, where carvings or other decorations are placed directly on the wainscot to add an ornamental touch. For the more traditional minded, this can give you a lot of design opportunities.

If you are just looking to make some visual improvements, then faux wainscoting may be the solution for you. This type of wainscoting involves using only paint or wallpaper for minimal work and maximum impact.

You can even wainscot areas of your bathroom with tile or bead board. If you use wood, keep in mind that the wood must be sealed to prevent future mold build up and water damage. Caulking, or sealing the joints of the wood, comes in handy and prevents future problems.

Taking a few precautions now will no doubt save you a lot of money in the long run. You do not want to have to reinstall the wainscoting in a few years just because of problems that can easily be prevented! This is true for any part of the house you wish to panel, especially if you live in rainy areas or experience long winters.

Home Improvement

Tenant improvement allowances, funds provided by the landlord to improve office space, are becoming increasingly prevalent during landlord-tenant negotiations, and all companies should consider their role in creating an ideal office space. However, companies seeking to lease at least 5,000 square feet of Class A & B office space with a lease term of at least five years can exercise much greater leverage on the landlord and will typically find it easier to achieve many of the suggestions below. If in doubt, you should consult with a real estate broker to determine the feasibility of any specific item.

1. In todays economic environment, many landlords are providing and funding 100 percent of the building standard installations required by tenants.

2. Tenants should try to negotiate above-standard items, such as millwork, extra HVAC, large glass walls, plush carpeting or special lighting, to get them included in the tenant improvement allowance provided by the landlord.

3. When landlords refuse to fund all or a portion of above-standard items, tenants can try to amortize their cost into the rent over the term of the lease instead of paying out of pocket.

4. Funding above-standard work can also be achieved via negotiating tactics, for example, offering to decrease the quantity of free rent and increase the tenant improvement allowance instead.

5. We recommend tenants hire an architect to represent their interests and suggest a layout and design of the space to ensure tenant improvement allowances are put to the best possible use.

6. Tenants can avoid the need for a large tenant improvement allowance by touring many suites and finding one with a suitable existing configuration. However, we advise tenants to avoid compromising the amount of their tenant improvement allowance just to decrease the rental rate.

7. Landlords are providing generous tenant improvement allowances for new tenants, and tenants can use this as leverage even if they are only renewing, especially if they have occupied the space for the past five-to-ten years.

8. If landlords offer a specific dollar amount for a tenant improvement allowance, we advise tenants to negotiate an open-bid format, based on an expert review by their own architect, project manager or construction firm.

9. Many companies are using tenant improvement allowances to create more light in the workplace by adding glass in offices and conference rooms. From narrow, vertical side-windows to full walls of glass, natural light illuminates interior areas and provides sight-lines for workers to improve communications and productivity.

10. We always recommend tenants hire an architect to brainstorm about the best uses for tenant improvement allowances. Many companies are decreasing hard-walled offices in favor of flexible workstations and huddle rooms, small two-to-four person conference areas, to accommodate departments changing needs.

Home Improvement

For bathroom lighting tips, you actually will be in a position to test out different home improvement magazines and web sites. You can purchase many interesting and creative concepts with many lighting tips. Home design stores may provide you really lighting pointers, which is able to be really useful particularly when you really are also planning to make a bathroom makeover.

A ceiling fixture that lights the whole room is a must. You also need task lighting over your kitchen sink and in your major figure area. If your table is in the kitchen, a dropped fixture over the table is appropriate. Employ a dimmer switch on that fixture hence that you really is in a position to regulate the mood. Trace lighting that will be able to be directed at a butcher block island or a breakfast bar is handy.

Much of the lighting during a space is really contributed by light reflected from a surface. Footamberts (fL) measure the amount of light reflected from a surface. If you really want to purchase very technical, (fL= fc x % reflectance). As an example, if 100fc reach a wall or table that is painted with a 40% reflective surface, then 40fL may reflect from that surface.

The kitchen is a place where brilliant, functional lighting is a necessity. Under cabinet lights are also a good option to provide good visibility for food preparation; poor lighting during this area can even increase the danger of injury while cutting food. Consider installing up lights above the cabinets to supply gentle illumination for the ceiling area – this is also a good way to highlight artwork or detail pieces love contrasting ceiling and wall paint colors, or crown molding. An excellent overhead chandelier or ceiling light fixture is going to give for the room’s general lighting wishes. If you suffer a kitchen office or PC area, include a functional desk lamp.

Task lighting can be as simple because a desk lamp or end table lamp. This sort of lighting is most regularly used for reading, but is as well useful for other projects that require the ability to determine detail. It is very recommended that each seating position during a room have its own task lighting, but this isn’t always possible. Place lamps on bedside tables and finish tables; you can also place sofa table behind the couch and place a lamp there because well. Floor lamps are an alternative choice, and can figure well behind chairs that are angled into a corner. Finally, recessed lighting is able to give further light where other options are also unavailable.